3.5mm Thickness Double-Side Fabric PVC Conveyor Belt for After Ceramic Klin Conveying
Description
- Thickness: 3.5mm~3.8mm normally
- Ply: 3ply fabric impreg. PU+3 ply PVC
- Color: Petorol green
- Standard width: 2000mm and 3000mm
- Application: PVC conveyor belt for using in the exit of ceramic klin
- Characteristics: Heat Resistant
The conveyor belt usually passes through the following lines:
- The process of transporting the finished ceramic blanks from the raw material warehouse to the porcelain workshop.
- The ceramic blank formed by the mold in the porcelain workshop is transported to the conveyor belt of the drying equipment for drying.
- The dried ceramic blanks are transported to the loading area in front of the kiln for preparation for loading into the kiln.
- The ceramic blank is calcined through the conveyor belt in the kiln to complete the firing.
- After firing, the finished ceramics enter the quality inspection area through the conveyor belt for quality inspection.
- Qualified finished ceramics are transported to the packaging and storage area for packaging and storage, and finally sent to the sales channel through the logistics conveyor belt.
TECHNICAL DATA SHEET
If our fabric conveyor belt using in the exit of ceramic klin caters to your requirement, Welcome to buy high quality low price conveyor belt from our factory. As one of the leading China belt manufacturers and suppliers, we must be your best choice.
